Last State Restores the system to the status before power failure or Chapter 3 interrupt occurred. Answered on May 19, Posted on Aug 24, Be the first to answer. Position the heatsink onto the reten- mechanism on the motherboard. Change these settings only if you are familiar with the chipset.
|Date Added:||27 November 2007|
|File Size:||48.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Each lever can be pressed down in only ONE direction.
Disabled Disable this sequence. Changing CPU Vcore could lead to a unstable system; therefore, it is NOT recommended to change the default setting for long-term usage. Can enter and change the settings of the setup menu. If jax2 hear 8 or more it is probably your RAM that is knacked.
Answered on Jul 28, Posted on Aug 24, Be the first to answer. Meanwhile, read the documentation for the expansion card mso make any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration. Power Button Function This feature sets the function of the power button. Spread Spectrum When the motherboard clock generator pulses, the extreme values spikes of the pulses creates EMI Electromagnetic Interference.
The connector location and pin assignments are as follows: Using 4- or 6Channel Audio Function. Posted on Sep 01, Be the first to answer. However, if any program writes to this memory area, a system error may result.
Posted on Jan 27, Be the first to answer. Disabled Disables the onboard Floppy controller. Aperture is a portion of the PCI memory address range dedicated for graphics memory address space. Press the two levers down to fasten Press down the fan until its four clips get wedged in the holes of the retention mechanism.
This gives you an opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes offline. The plastic clip at each side of the DIMM slot will automatically close. Click the Speaker Configuration tab.
Trademarks All trademarks are the m-s6567 of their respective owners. To enable 4- or 6-channel audio operation, first connect 4 or 6 speakers to the appropriate audio connectors, and then select 4- or 6-channel audio setting in the software utility.
Reconnect power code and ide or sata cable to harddisk again.
You want to change the default settings for customized features. The field appears only when your board supports USB 2. You can install either single- or doublesided modules to meet your own needs.
Connector configurations for 2- 4- and 6-channel using S-Bracket are described below: To connect to the ATX power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. The S-Bracket offers 2 SPDIF jacks for digital audio transmission one for optical fiber connection and the other for coaxialand 2 analog Line-Out jacks for 4-channel audio output.
It introduces a 66MHz, bit channel for the graphics controller to directly access main memory. You will be prompted to confirm the password. Locate the CPU and its retention 2. IDE1 can connect a Master and a Slave drive. Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions. The openings on the enclosure are for air convection hence protects the equipment from overheating.