J23 This jumper is reserved for Cyrix processor that run at MHz. By pressing ‘print’ button you will print only current page. After selecting it, the following message will appear: Attach a power saving switch to JGS1. Table of Contents Add to my manuals Add.
|Date Added:||15 June 2006|
|File Size:||70.68 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
In effect, the system remains alert for anything which occurs to a device which is zudio as Enabledeven when the system is in a power down mode.
The driver need these ID. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. Typematic Rate Setting auduo Keypad is arrow keys.
This option enables the level 2 cache memory. Connect the Power LED from the system case to this pin. Power On By Ring This connector is for optional wireless transmitting and receiving infrared module.
The Optimal and Fail-Safe default settings are Auto. Cpu Core Speed Derivation Procedure Parallel Port Irq Memory Population Rules 2.
Danger of explosion if battery is incorrectly replaced. This option enables the level 2 cache memory. By pressing ‘print’ button you will print only current page. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This power connector supports instant power on function which means that system will boot up instantly when the power connector is inserted on the board. If the Chassis is open, the switch will be open.
This information is retained by a battery when the power is off. Video Off In Suspend Paging Mode Control Select the paging mode control.
The default setting is short. Power On Function This function allows me to select the item to power on the system. The settings are Blinking, Dual, and Single.
DPMS default Initial display power management signaling. Delay 4 Sec, Instant-Off. The connector location and pin definition are shown below: This switch has the same feature with JRMS1. Power Saving Minimum power management.
To operate properly, at least one pin DIMM module must be in- stalled. User Defined default Allows you to set each mode individually. The settings are Disabled, Standby or Suspend. IDE1 can connect a Master and a Slave drive. Mic is a connector for the microphones.